黄网址免费观看-黄网址在线免费观看-黄页国产网站在线-黄页网站日本人在线-黄页网站在线免费观看视频-黄在线

NAMD Series SF6 Density Relay Calibrator     NAMD高精度SF6密度繼電器校驗儀

產品簡介

NAMD高精度SF6密度繼電器檢驗儀是最新高精度儀器，儀器關鍵器件全部采用精密進口件，通過高精度壓力傳感器及高精度A/D、D/A轉換器，結合高性能32位ARM單片機和TI公司的高速信號處理芯片，能自動完成對密度繼電器的校驗，能準確測量信號動作時當前溫度下的壓力值并自動完成任意環境溫度至20℃時的標準壓力換算，能自動打印試驗數據并自動存儲以備查閱，整個過程不須人工干預，并自動識別測試過程中的故障，體現了儀器“智能型”的特點。儀器具有高精度，高穩定性，高可靠性的特點。

產品別名

SF6密度繼電器校驗儀，全自動密度繼電器測試儀，六氟化硫密度繼電器校驗儀，SF6氣體密度繼電器校驗儀，SF6密度繼電器測試儀，密度繼電器校驗儀

產品特性

1)本產品采用32位ARM單片機和TI公司的高速信號處理芯片進行檢測與控制，集成程度高。機電一體化設計，精度高，重復性好，可靠性高。

2)配置了大屏幕中英文液晶屏和旋轉鼠標（一鍵飛梭）人機接口，操作簡單、界面美觀，所有參數及狀態一目了然。

3)自動完成壓力測量和20℃值轉換，從而完成了壓力、溫度間的動態自動補償。并顯示被測環境溫度下的壓力、20℃時環境溫度下的壓力、環境溫度。徹底解決了SF6氣體密度繼電器現場校驗難的問題。

4)所有測試過程自動由儀器完成，不用人工干預，避免了繁瑣的人工氣路調節操作。

5)漢字報表式打印測試結果，并對試驗結果進行智能分析。

6)能同時存儲50次試驗結果，并具有掉電數據保護功能，可隨時查詢和打印以前的試驗結果。

7)校驗過程中無需恒溫室，可以在任意有效溫度范圍內對SF6氣體密度繼電器、壓力表進行校驗。

8)配有多種型號過渡接頭，大多數型號開關的密度繼電器不用拆卸即可進行現場校驗。

9)校驗過程中耗氣量極少，不浪費SF6氣體，測試成本低，對環境無污染。

10)具有在線修改系統時鐘的功能。

11)具有在線修改系統壓力功能，可以現場修正。

12)核心元器件采用進口元件，性能可靠。

13)能同時測試一組報警信號、二組閉鎖信號。

14)本產品為便攜式工具，使用方便可靠，是SF6密度繼電器校驗的選擇。

產品參數

NAMD Series SF6 Density Relay Calibrator

Product introduction 

NAMD Series SF6 density relay test instrument is the latest high-precision instruments, its key parts all imported from foreign countries, used high accuracy pressure sensor and A/D,D/A transducer, combined with 32 ARM single-clip and high speed signal dealing clip of TI, can finish the test for SF6 Intensity Delay automatically, can correctly test the pressure under signalizing activity, and finish the standard pressure conversion under 0~20℃, can save and print the test results, the whole procedure need not people control, can automatically indentify the fault during the test. Its with the features: high accuracy, high stability, strong reliability.

Also called name

SF6 density relay calibrator, automatic density relay tester, density relay calibrator sulfur hexafluoride, SF6 gas density relay calibrator, SF6 density relay tester, density relay calibrator, NAMD Series SF6 Density Relay Calibrator

The Characteristics of the products

1. Use 32 ARM single-clip and high speed signal dealing clip of TI to test and control, with high integrated degree, electromechanical integration design, with high accuracy, good reproducibility and strong reliability.

2. Equipped with monochrome LCD and soft keyboard man machine interface, easy to operate, with beautiful appearance.

3. Automatically finish the conversion between pressure measurement and 20℃, thereby finish the dynamic automatic compensation between pressure and temperature. And display the pressure of the measured environment, the equivalent pressure under 20℃, temperature.

4. The device automatically finish the test, do not need people's intervention

5. Print the test results in report, and intelligent analysis the results.

6. Can save the test results for 50 tests, can review and print the historical test results at any time.

7. Do not need thermostatic chamber during the test, can calibrate the SF6 density, pressure meter at any available temperature.

8. Equipped with many kinds of transition joint, for most of the density relay tester can do field test without disassembly.

9. Will not waste SF6 during the test, with low test cost, without pollution to environment.

10. Can online modify the system time.

11. Can online modify the system pressure on site.

12. Its key parts all imported from foreign countries, with reliable property.

13. Can test on group alarm signal , two groups atresia signal.

14. This product is portable device, easy and reliable to use, it is the ideal equipment for SF6 density tests.

The parameters of the products

1. working voltage: AC220V、50Hz

2. power:50W

3. accuracy:0.5

4. pressure display resolution:0.001MPa

5. voltage measurement range:0~1.0MPa

6. temperature display resolution:0.1℃

7. temperature measurement range:-50℃~150℃

8. humidity:≤90%RH

9. Test objects: single alarm, single atresia, single alarm & single atresia, dual alarm & dual atresia

10. display:320×240 Graphics Dot Matrix monochrome LCD

11. operation: soft keyboard

12. printer: high-speed micro printer

13. print method: report type

14. Storage Capacity: can save 50 test results at the same time

15. dimensions: host 365mmx300mmx220mm

16. accessory case 390mmx360mmx225mm

17. NAMD SF6 density display: the pressure of the measured environment, the equivalent pressure under 20℃

18. weight:6.0Kg

19. accessory case weight:9.8Kg